Reeded / Fluted Glass Film Installation Instructions

Reeded Glass Film – Step by Step Installation Guide

Follow these easy steps to install your reeded glass film perfectly:

Step 1: Clean the Glass
Remove all dust, dirt, and grease from the window or door glass using a mild detergent.

Step 2: Measure & Cut
Measure the glass surface and cut the film slightly larger than the window.

Step 3: Spray Water Solution
Spray a mixture of water and a few drops of soap onto the glass.

Step 4: Apply the Film
Peel the backing from the film carefully and position it on the wet glass.

Step 5: Smooth Out Bubbles
Use a squeegee or flat tool to push out all air bubbles and excess water.

Step 6: Trim Edges
Trim any excess film along the edges using a sharp utility knife.

Step 7: Dry & Set
Allow the film to dry completely for 24 hours. Avoid touching or cleaning it during this period.

Tips:

·         Use a soft cloth to wipe any remaining moisture after installation

·         Work slowly to ensure a bubble-free finish

Download Installation Gide (PDF) from our website for further details